diy aquaponics fish tank | Fire Tin can stove success

diy aquaponics fish tank

I decided to make another tin can stove with the new design, but this time I thought Id make it work.

A major design flaw of the first attempt was not actually the bit where the tin ripped in two, but was actually the bit where I was thinking upside down.

The previous version had grooves that would only reach the bottom.

That was never going to work.









This time I made the grooves in such a way as they would still be grooves when they reached the top.

Much more likely.

So, the top (open ended) half of the can is bent like this, and made to sit into the bottom (still with the base on) of the can.

All up this process takes only 5 minutes or less.

The zig-zag bit is placed zig-zag down into the half on the left.

It doesnt even need to be a snug fit.

Just drop it in place.





The result is, that when you light the alcohol and wait a few seconds for the device to heat up, it vaporizes the spirit within the zigs and the zags of the two walls created by the can halves, and is emitted as gaseous fuel through the top of the (now inverted) zig-zag bits.

Like this.

Perfect!

And quick.

A quicker, more durable ethanol stove.

A total success.




Much better than the last attempt.

Thanks to whoever first thought of this method of making a little spirit stove, that enable the happy camper to knock out a stove within a few minutes of dumping a cans contents into a pot.

Now all I need is canned food that actually tastes good.

And perhaps the ability to make a tin can.

I have no idea how to make a tin can.

But Im not going to make a can as a "Thing" because nothing good ever came out of a can.





120 Things in 20 years - No can was hurt in the making of this post.



And sweetened condensed milk comes in a can, and that stuff is delicious.

But I still dont want to learn how to make a can.





















Do you find information about diy aquaponics fish tank are you looking for? If not, below may help you find more information about the diy aquaponics fish tank. Thank you for visiting, have a great day.

Read More..

diy aquaponics arduino | Stirling engine Success!

diy aquaponics arduino

I just made an engine!

I even think I got it on video.

It ran for about a minute at around 78 rpm before making a popping sound and seizing up.

Which would have been perfect if it was connected to an old record player...

playing a very short song...

that I only wanted to hear once.

The camera battery went flat during filming, but but the video should be on there. Ill find out tomorrow. If not, Ill just fix it.

Yay me!

More later...



120 Things in 20 years is very pleased with itself       :{)

Do you find information about diy aquaponics arduino are you looking for? If not, below may help you find more information about the diy aquaponics arduino. Thank you for visiting, have a great day.

Read More..

diy aquaponics diagram | Electronics Motor repair success

diy aquaponics diagram

I fixed my broken motor that is meant to power the auger via the tiny gearbox that will deliver the fish food in my demand fish feeder.

Normally I prefer less complicated sentences.

But Im all excited.

It turns out, the problem was there were simply too many parts.

Or more accurately one too many parts, and one that was simply in the way.

The silver bit was the one too many. I think that broke off the bit where the wires connect, and fell into the motor, generally clagging things up.





The little nylon washer creates part of the front bearing, but it made getting the brushes back on impossible, because it had to be put on after the brushes. Thats an impossible path through the plastic front. I dont have the kinds of quantum tools that walking through walls requires. And if I did, I wouldnt waste my time with motor repairs. Id do much more interesting stuff, like poking my head through the fridge to see if the light really does go off when the door is closed.

So be leaving out those two small parts, I managed to make my motor work.

Only two parts.

And they were tiny.

Those that know me will realise thats a pretty low number of excess bits after a repair. I think I did quite well.

So well in fact, that it looks like this when its running.

That should do nicely.

What this all means, is that there is really no reason why I cant put this thing together today, and actually finish something.

Maybe.








120 Things in 20 years - If I keep repairing them, one day an electronic motor repair might leave me with enough parts to eventually build another motor. I should fix cars.

Do you find information about diy aquaponics diagram are you looking for? If not, below may help you find more information about the diy aquaponics diagram. Thank you for visiting, have a great day.

Read More..