diy gravity aquaponics | Rosemary Revisited

diy gravity aquaponics

Rosemary in aquaponics is one plant that I need to retry, it didnt do well the last trial. This time Ill do it in the #SilosGrowbed style aquaponics.

Almost two weeks ago I planted few cuttings and checking it today to see whether there are any sign of positive growth.

Pull out the cuttings from the pot, and it does show some root growth.

It looks good as above, the last time I tried Rosemary due to sludge in the growbed their roots does not look that good as in photo below.

Closer look on the cuttings below, sure is promising.

Re-pot the cuttings in one of the Silo tube, to give it more root zone for better growth.

Since I do not have much growbed space left, the Silo tube are place into existing growbed.

Will be few more weeks before I know for sure whether it will grow in this style of planting.

Do you find information about diy gravity aquaponics are you looking for? If not, below may help you find more information about the diy gravity aquaponics. Thank you for visiting, have a great day.

Read More..

diy aquaponics tote | Gutter Growbed Revisited

diy aquaponics tote

Did gutter growbed in March 2010, that time I was using loop siphon and it is difficult to get right. This time Im doing it with Bell Siphon and for planting Strawberry plants.

Main reason why I am trying this again is to reduce the amount of LECA needed since Ill use pot for the plants and it will be easier to do Strawberry in rows on a step.

I need to make a shorter bell siphon since gutter is not that deep, water height the most would be three inches. Therefor the siphon will need to be cut and tailor made to three inch or less. I will try using 20 mm strainerbell siphon modified to suit. A 15 mm StrainerBell would be a good size but I had not tried this size for long.

Do you find information about diy aquaponics tote are you looking for? If not, below may help you find more information about the diy aquaponics tote. Thank you for visiting, have a great day.

Read More..

diy aquaponics systems | Aquaponics Self cleaning swirl filter revisited

diy aquaponics systems

One of the many people named Anonymous took the time to comment on my self cleaning swirl filter, so I thought Id revisit the topic with some thoughts Ive been having.

For the last few weeks Ive been thinking of getting some more fish.

And Ive also been thinking about developing the self cleaning swirl filter a little more.

My original design was to tap off a small amount of clean water for NFT tubes employing the self cleaning filter to keep the roots from collecting solids and blocking the NFT tubes. In the end I got around that by just taking my water from the sump, where there were no solids, but that required a better pump to get water to the top of the tubes. .


If this were ever to be implemented as a system to remove solids from a system rather than returning them to the grow beds it would need some adjustment.

Its easy to set up a container so that it is right at the point of tripping a siphon, but will never actually get there unless someone suddenly dumps water into it. With this in mind, one option I thought of  when I was playing with this idea, was to use a deer scarer...

http://en.wikipedia.org/wiki/Shishi-odoshi

Set a dripping tap, so it slowly filled a deer scarer. The deer scarer should tip only once or twice a day, and should dump the same amount of water that the self cleaning swirl filter takes from the system each time its triggered.

Im going to build a deer scarer, and see how it works, then see if it really would take care of dosing the self cleaning filter with the correct amount of water to make it do its thing.

You can see my previous work on my self cleaning swirl filter here.

Do you find information about diy aquaponics systems are you looking for? If not, below may help you find more information about the diy aquaponics systems. Thank you for visiting, have a great day.

Read More..

diy small aquaponics system | 15 MM StrainerBell Siphon

diy small aquaponics system

The 25 mm (1 inch) Funnel Bell Siphon was the first siphon that I made after few months of trying out various siphon style to get a good water control of the aquaponics growbed. It is reliable in its operation and has made my aquaponics quest a breeze.

I later made a smaller 20 mm siphon which are able to do same function as the 25 mm but with less parts, smaller and lighter to shipped. Smaller siphon will requires less water inflow to operates thus making power consumption of the water pump less as compared to its bigger brother.

I had been toying with even smaller siphon ever since I started aquaponics, in fact the first siphon that I made make use of 15 mm size stand pipe, however it was without the funnel for that venturi effect making in operationally unreliable. Again the smaller 15 mm siphon was use when I was testing hydroton somewhere early 2010 as here and photo below.

The siphon that I use in the above photo around February 2010 was a 15 mm siphon with strainer and bell enclosure. I did not use this design much because at that time it was very difficult to control.

Video of my earlier 20 mm Siphon just as a reference, this siphon has been replace with the current StrainerBell design which is easier and cheaper to make.

Since then I had gain more and more knowledge in the operation and tuning of the siphon making the 15 mm size standpipe a viable option again.

Few days ago I made a Crayfish tank and I decide to make use of the 15 mm siphon, this time it is a StrainerBell design to be use with the tank for water circulation purpose as in photo below.

The smaller the siphon, the more difficult it is to get right. This is due to its operational tolerance is very small, e.g. the water inflow required is small and the pump that being use also will be small, if there is degradation of pump in the case of blockage or age then water flow affected thus making the siphon fail to operate correctly.

Im making another 15 mm siphon for my Ornamental set which currently using 20 mm siphon. The main reason why I am keen on trying this smaller size siphon is only for one reason that is for energy saving. Due to smaller inflow requirement, this siphon will be able to operate with a 5 watt pump, this small power requirement is ideal if we want to be off grid and operates aquaponics with solar energy.

Smaller water inflow also means that we may be able to get the siphon to operates with water from an airlift pump which we could powered by compressed air from a hand pump reservoir or just a tiny aerator which consume even less power.

On the left is the 15 mm StrainerBell siphon and the right is the 20 mm, all parts are the same just that it is 1 step smaller.

The siphon is installed to my spare Ornamental set for testing, which I need to verify it operational reliability and problems in actual growbed environment for at least six months before I can make any recommendations.

Installation is same like the 20 mm, it is just smaller. The extender tube is a 25 mm size then a 25 to 15 mm reducer to do the venturi.

Capped and ready to go.

I use as smaller pump, 20 mm siphon uses 1000 liter per hour pump, this 15 mm siphon uses 500 liter per hour pump.

Even at 500 liter per hour with 2 ft head, water inflow is still too much for this siphon. Above pump is rated at 7.7 watt, from my test a 5 watt pump is sufficient. This 15 mm siphon can do growbed size up to 10 sq ft. 

The energy requirement is 5 watt for each siphon, the electricity cost is calculated as below for Malaysian electricity tariff;

• 5 watt x 24 hrs x 30 days = 3.6 kwh which will cost about RM 1.30 (USD 0.42) per month of operation.

• It work out that on average this 15 mm siphon requires 1/2 watt of electricity per sq ft of growbed space.

Siphon top part is fixed in its design and tuning it can only be adjusted to set water level, what left is the outlet to be tune. Like a two stroke bike, the entire air path need to be tune for optimum operation, which will include air intake right down to the exhaust chamber for balancing the airflow.

Siphon is the same, we will need to tune it making an optimum water path and since the inlet part is already fix whats left will be the outlet part to be adjusted to suit. As a baseline design, standard double elbow arrangement works in most cases, but it has its limitation, if water inflow above or below the baseline for the siphon, the outlet needs to be modified.

Below are various outlet style that I am trying to get the optimum operation with water inflow more than what is needed.

Few more as follows, it is for illustration only. Each of these will require a long explanation of why it is that way.

Each outlet is tailored to specific condition of what we want to do to the siphon, either to reduce noise, to increase aeration or to compensate for too much or too little water.

There is more that the above design of outlet that I am currently testing for this 15 mm StrainerBell siphon and so far its holding fine after few hours of operation. Now let see whether it can still hold after six months.

Do you find information about diy small aquaponics system are you looking for? If not, below may help you find more information about the diy small aquaponics system. Thank you for visiting, have a great day.

Read More..

diy aquaponics fish garden | Rosemary Surviving

diy aquaponics fish garden

Planted this in first week of July and after about two months its looking good.

Will plant another three pots to fill up the #guttergrowbed

Do you find information about diy aquaponics fish garden are you looking for? If not, below may help you find more information about the diy aquaponics fish garden. Thank you for visiting, have a great day.

Read More..